Accelerator Linkage Rubber Bellows

Rubber gaiter through bulkhead for throttle

Air Filter Element (Conical Paper Type) GFE1001

Air Filter Element (Conical Paper Type)

Air Filter Sticker "COOPERS"

Air Filter Sticker "COOPERS"

Bracket-Throttle / Accelerator Spring To Manifold Clamp

Bracket-Throttle / Accelerator Spring To Manifold Clamp

Carburetter Service Kit A35 (26VME)

26VME Carburetter Service kit Includes:- Gaskets,Needle Valve,Mixture Screw,Springs and Washers

Carburettor 1.1/4" HS2 With Breather - Reconditioned £229.00 + £100.00 Surcharge Included *Click Here For More Details*

A fully reconditioned 1.1/4" HS2 carburettor with breather for 948/1098cc engines. Reconditioned CRB242RB (Exchange) Carburettor. *Surcharge CRB242BSC of £100.00 excluding vat is included in this purchase price.* Please note that this is an exchange item and it requires a serviceable exchange unit from you of the exact same type and specification. On receiving a serviceable exchange unit from you we will issue a credit for the surcharge amount. All return carriage costs are the responsibility of the customer. We thank you for your co-operation in returning exchange units so allowing the continuation of the availability of these parts in the future. We appreciate the return of all exchange units as soon as is practicably possible.

Carburettor 1.1/4" HS2 Without Breather - Reconditioned £229 + £75.00 Surcharge Included *Click Here For More Details*

A fully reconditioned 1.1/4" HS2 carburettor without breather for 948/1098cc engines. Reconditioned CRB242R (Exchange) Carburettor. *Surcharge CRB242SC of £75.00 excluding vat is included in this purchase price.* Please note that this is an exchange item and it requires a serviceable exchange unit from you of the exact same type and specification. On receiving a serviceable exchange unit from you we will issue a credit for the surcharge amount. All return carriage costs are the responsibility of the customer. We thank you for your co-operation in returning exchange units so allowing the continuation of the availability of these parts in the future. We appreciate the return of all exchange units as soon as is practicably possible.

Carburettor 1.1/4" NEW HS2 (Minor 1098cc 62-70 & 948cc 60-62 With Breather)

Carburettor-Late 1.1/4" HS2 NEW (1098cc 62-70 & 948cc 60-62 with breather)

Carburettor 1.1/4" NEW HS2 (Minor 1098cc 62-70 & 948cc 60-62 without breather)

Carburettor-Late 1.1/4" HS2 NEW (1098cc 62-70 & 948cc 60-62 without breather)

Carburettor Dashpot Oil 125ml - UK Mainland Shipping Only

Carburettor Dashpot Oil 125ml UK Mainland Shipping Only

Carburettor Float Bowl Lid Gasket HS2 AUC8459

Carburettor Float Bowl Lid Gasket HS2

Carburettor Gasket Pack - A35 (26VME)

A35 with Zenith 26VME Carbs

Carburettor Gasket Set - A30 (26JS)

Carburettor Gasket Set HS2 (948cc 60-62 & 1098cc 62-70)

Carburettor Gasket Set HS2

Carburettor Rebuild Kit - A30 (26JS)

Carburettor Rebuild Kit HS2 (948cc 60-62 & 1098cc 62-70)

Carburettor Rebuild Kit (1098cc) HS2

Carburettor Service Kit HS2 (948cc 60-62 & 1098cc 62-70)

Carburettor Service Kit (1098cc) HS2 (948cc 60-62 & 1098cc 62-70)

Choke Cable - HS Carburettor Only (Not Zenith) LONGER

Longer type choke cable for use with HS2 Carburettors  

Choke Cable - Zenith Carburettors

Choke Cable - Zenith Carburettors

Clip - Fuel Tank Joiner Rubber Pipe

Copper Fuel Pipe, Tank To Pump

Tank To Pump with unions and olives, All Models.

Electronic Fuel Pump / Petrol Pump - HARDI, Dual Polarity

These fuel pumps have been designed as dual polarity so that they can be installed regardless of the positive or negative polarity of your vehicle.So if your vehicle is negative earth then the positive terminal must be connected to the ignition feed supply and negative terminal to the chassis.However, if your vehicle is positive earth, then the positive terminal must be connected to the chassis and negative terminal connected to the ignition feed supply.

Filler Pipe To Floor Grommet (Saloon)

Petrol Tank Filler Pipe Through Boot Floor Saloon Models Only

Float Kit - Late HS2 - StayUp (WZX1304)

Float Kit - Late HS2 - StayUp (WZX1304)

Fuel / Petrol Pump (Genuine S.U.) Electronic Type (Negative Earth)

Fuel / Petrol Pump (Genuine S.U.) Electronic Type (Negative Earth ONLY). Fixing bolt = FIX130A x2. IMPORTANT: Please ensure your vehicle is wired negative earth before ordering this pump. Fitting this pump to a positive earth vehicle will cause immediate damage to the electronics and void the warranty!

Fuel / Petrol Pump (Genuine S.U.) Electronic Type (Positive Earth)

Fuel / Petrol Pump (Genuine S.U.) Electronic Type (Positive Earth ONLY). Fixing bolt = FIX130A x2. IMPORTANT: Please ensure your vehicle is wired positive earth before ordering this pump. Fitting this pump to a negative earth vehicle will cause immediate damage to the electronics and void the warranty!

Fuel / Petrol Pump (Genuine S.U.) Standard Type With Points

Fuel / Petrol Pump (Genuine S.U.) Standard Type With Points. Suitable for both positive AND negative earth vehicles. Fixing bolt = FIX130A x2.

Fuel Pipe - Pump to Carburettor

Unions - 1/2 x 20 UNF (Included)

Fuel Pump Kit (Lift Type)

Use the components in this kit to fix to the lower half of your original lift type pump. Fuel pump repair kit, Contains new diaphragm, and top half of pump, fixings etc, WARNING: Other complete/replacement pumps are available, however the actuator arms are not dimensionally correct for the Austin and will likely not work and/or cause damage to your camshaft/engine.

Fuel Tank / Petrol Tank Sender Unit Gasket (CORK)

Fuel Tank / Petrol Tank Sender Unit Gasket (CORK)

Fuel Tank Joiner Rubber Pipe

joins new repro tank to existing curved filler pipe from old tank

Fuel Tank Sender Unit

Fuel Tank Sender Unit

Gasket Inlet/Exhaust Manifold Joint (803/948cc) 2A106

Gasket Inlet/Exhaust Manifold Joint (803/948cc) 2A106

Gasket- SU Carburettor To Manifold (948/1098cc) 1G2624

Gasket-Carburettor To Manifold (948/1098cc) 1G2624

Grommet (Throttle/Choke Cable Through Bulkhead)

Grommet (Throttle/Choke Cable Through Bulkhead)

Jet Assembly HS2 Plastic (S.U.) AUD9098

Jet Assembly (1098cc) HS2 Plastic AUD9098. Suitable for late 948cc models with HS2 carburettor and all 1098cc models.

Locking Petrol Cap - A30/A35 Saloon - Stainless

Polished stainless steel, fits A30/A35 saloons.

Mixture Screw for 26VME Carburettor

Needle & Seat (Float Bowl Lid) WZX1101

Needle & Seat (Float Bowl Lid) WZX1101

Needle For HS2 Carburettor 1098cc "AN" AUD1478

Needle For Carburettor 1098cc "AN"

Needle Valve For Zenith 26VME Carburettors

New SALOON Petrol Tank - Replacement Kit With Fittings **SEE DESCRIPTION**

For A30, A35 Saloon vehicles built Oct 1953 onwards. Not suitable for early AS3 models*Please Note - This is an MG Midget tank that has been modified to fit the A30 & A35 Saloons. You will need to retain the filler neck from the original tank, a rubber joiner and clips are included to attach it to the new tank. This tank is not the same shape as the original as such it will require some adjustments to make it fit.

Petrol Filler Pipe Grommet, Saloon

petrol filler pipe through car body (not suitable for AS3 chassis models)

Pinch Bolt / Trunnion - Choke Cable To Carburettor (HS2) **SEE NOTES**

Pinch Bolt / Trunnion - Choke Cable To Carburettor (HS2)Not suitable for H1 and H2 carburettors, use FUL130 pinch bolt

Repair Kit - Fuel Pump / Petrol Pump S.U. AUA66

Suitable for single Low Pressure pumps made Pre 1985 - identifiable by 2BA earth Screw in coil Housing. E10 compliant

Screw - Fuel / Petrol Tank Sender Unit (Set 6)

Screw-Tank Sender Unit (Set 6)

Slow Running Jet - Zenith 26VME Carburettors

Special Nut - For Fuel Line

Special Nut for Fuel Line.Use with Olive

Special Olive - For Fuel Line

Oilve - For Copper Fuel Pipe

Throttle / Accelerator Cable Pinch Bolt Assembly - Complete

Throttle / Accelerator Cable Pinch Bolt / Trunnion Assembly - Complete

Throttle / Accelerator Cable Return Spring

Throttle / Accelerator Cable Return Spring