Electronic Ignition Kit - 25D4 Distributor (Positive Earth Only)

Electronic Ignition Kit - Compatible with Lucas 25D4 distributors only. Will not fit earlier distributors such as DM2 - please check your distributor before ordering. Vehicle MUST be POSITIVE earth. We advise the use of the uprated Lucas 'Sports' Coil (part no. VAC103LS) with electronic ignition setups.

Engine Service Kit - 948/1098cc Push-In H.T.Lead Type Cap with H.T. Leads & Coil (With Spin-On Oil Filter)

With a spin-on oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, H.T. leads, coil, points, rotor arm & condenser.

Engine Service Kit - Push-In H.T.Lead Type Cap with H.T. Leads (With Spin-On Oil Filter)

With a spin-on oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, H.T. leads, points, rotor arm & condenser.

Ignition Coil - Late Type Push-In H.T. Lead (VIPER)

VCS - Viper Dry Ignition Coil Sport in Black finish.Suitable for 12v non ballast ignition systems with points or aftermarket electronic ignition.The Viper Dry Ignition Coil is a modern high performance 3.0 ohm coil designed to replace your traditional oil filled coil.Unlike a traditional coil, the Viper uses a dry resin core instead of oil. This does away with temperamental performance associated with sloshing or dripping fluid, while keeping the same design format of a traditional coil. This resin core is encased in a smart silver painted metal housing, which will fit directly in place of your existing coil. What's more, having a solid dry core means the Viper coil can be mounted on any angle.Designed to out perform even the best oil filled coils, perfect for classic cars that use points or electronic ignition.The Viper Dry Sports Ignition Coil allows you to upgrade your classic car without compromising any of the period styling within the engine bay.A simple upgrade that requires very little mechanical skill to fit.This model replaces Lucas ignition coils with product codes DLB101 and DLB105Features:- Dry coil technology thanks to a resin core- Traditional design for classic looks- Easy to fit in place of your existing coil- Mounting bracket includedBenefits:- Superior performance thanks to consistent cooling- No dripping or leaking oil to worry about- Can be mounted on any angle- Perfect with points or aftermarket electronic ignition systems

Crankshaft Rear Oil Seal - 1275cc Marina & Ital Engine Only

Spare oil seal for 10M800B Crankshaft Oil Seal Conversion Kit. For 1275cc Marina & Ital engines only.

Crankshaft Rear Oil Seal - 1275cc Midget & Sprite Engine Only

Spare oil seal for 10M800A Crankshaft Oil Seal Conversion Kit. For 1275cc Midget & Sprite engines only.

Crankshaft Rear Oil Seal - 1098cc 10CC Midget & Sprite Engine Only

Spare oil seal for 10M800C Crankshaft Oil Seal Conversion Kit. For 1098cc 10CC Midget & Sprite engines only.

AccuSpark 25D Electronic Ignition Distributor - Complete (Top Entry Cap) POSITIVE EARTH ***SEE NOTES***

AccuSpark 25D Electronic Ignition Distributor - Complete (Top Entry Cap) - This is a fully electronic replacement for the original Lucas 25D and DM2 distributor. It has solid state internals and does away with the points & condenser for superior reliability. You will also require the uprated Lucas 'Sport' ignition coil (part no. VAC103LS) and the vehicle must be running POSITIVE EARTH.

Special Olive - For Fuel Line

Oilve - For Copper Fuel Pipe

Front Coil Spring

Front suspension coil spring for all models

Rubber Bump Stop, Front Coil Spring

Rubber cone for front suspension coil spring buffer

Oilite Washer, Top Trunnion

Special washer fits on king pin shaft, under the top trunnion. 1x required per side

A30 Wiring Loom 1953 (Braided)

For A30 AS3 models with round-dial dash and coil on dynamo. ***Intended for professional installation. Wiring diagram not supplied.***

A30 Wiring Loom 1952 (Braided Wiring Loom)

For A30 AS3 models with round-dial dash and coil on bulkhead. ***Intended for professional installation. Wiring diagram not supplied.***

A30 Wiring Loom 1952 with Flashers

For A30 AS3 models with round-dial dash and coil on bulkhead. With provision for flashing indicators. ***Intended for professional installation. Wiring diagram not supplied.***

Metal Oil Filler Cap - Chrome

Metal Oil Filler Cap - Chrome. For alloy rocker covers.

Engine Service Kit - 948/1098cc (Push-In H.T.Lead Type Cap) with H.T. Leads & Coil - LUCAS Components

With a standard paper element oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, H.T. leads, coil, points, rotor arm & condenser.

Engine Service Kit - 948/1098cc (Push-In H.T.Lead Type Cap) with H.T. Leads - LUCAS Components

With a standard paper element oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, H.T. leads, points, rotor arm & condenser.

Rear Hub Oil Seal ( A-Type Axle December 1953 Onwards ) SINGLE LIP TYPE BTA108 GHS147

Recommended for use on re-sleeved axles.

SET of 8 Valve Guides - Inlet & Exhaust - 803/948/1098cc (With groove for 10M186A oil seal)

SET of 8 Valve Guides - Inlet & Exhaust - 803/948/1098cc (With groove for 10M186A oil seal)

Repair Kit - Fuel Pump / Petrol Pump S.U. AUA66

Suitable for single Low Pressure pumps made Pre 1985 - identifiable by 2BA earth Screw in coil Housing. E10 compliant

Electronic Ignition Kit - 25D4 Distributor (Negative Earth Only)

Electronic Ignition Kit - Compatible with Lucas 25D4 distributors only. Will not fit earlier distributors such as DM2 - please check your distributor before ordering. Vehicle MUST be negative earth. We advise the use of the uprated Lucas 'Sports' Coil (part no. VAC103LS) with electronic ignition setups.

Piston Ring Set-1098cc +020" *5-RING TYPE*

Piston Ring Set-1098cc +020" *5-RING TYPE*3 x Compression Rings (0.0625") & 2 x Oil Ring (0.125")

Alternator Conversion Kit - COIL Mounting Bracket (Includes Alternator) 948/1098cc

Alternator Conversion Kit - COIL Mounting Bracket (Includes Alternator) 948/1098cc. Does NOT fit 803cc engines. Car must be negative earth.

Piston Ring Set-1098cc +030" *5-RING TYPE*

Piston Ring Set-1098cc +030" *5-RING TYPE*3 x Compression Rings (0.0625") & 2 x Oil Ring (0.125")

Piston Ring Set-1098cc +040" *5-RING TYPE*

Piston Ring Set-1098cc +040" *5-RING TYPE*3 x Compression Rings (0.0625") & 2 x Oil Ring (0.125")

Piston Ring Set-1098cc STD *5-RING TYPE*

Piston Ring Set-1098cc STD *5-RING TYPE*3 x Compression Rings (0.0625") & 2 x Oil Ring (0.125")

Alternator Mounting Bracket (Rear-Fixes To Block) With Coil Mounting

Alternator Mounting Bracket (Rear-Fixes To Block) With Coil Mounting. Allows the ignition coil to be mounted in the original position on to of the alternator. Supplied with fixing bolts for coil.

AccuSpark 45D Electronic Ignition Distributor - Complete (Top Entry Cap) ***SEE NOTES***

AccuSpark 45D Electronic Ignition Distributor - Complete (Top Entry Cap) - This is a fully electronic replacement for the original Lucas 45D distributor as fitted to various BL models from 1975 (Marina 1275cc etc.) Not Suitable For A+ Engines. It has solid state internals and does away with the points & condenser for superior reliability. For use on a Minor you will also require the uprated Lucas 'Sport' ignition coil (part no. VAC103LS) and the vehicle must be running NEGATIVE EARTH. ***FOR LUCAS 25D EQUIPPED CARS USE PART NO. DST211***

AccuSpark 25D Electronic Ignition Distributor - Complete (Top Entry Cap) NEGATIVE EARTH ***SEE NOTES***

AccuSpark 25D Electronic Ignition Distributor - Complete (Top Entry Cap) - This is a fully electronic replacement for the original Lucas 25D and DM2 distributor. It has solid state internals and does away with the points & condenser for superior reliability. You will also require the uprated Lucas 'Sport' ignition coil (part no. VAC103LS) and the vehicle must be running NEGATIVE EARTH.

Valve Guide-Inlet & Exhaust-803/948/1098cc (With groove for 10M186A oil seal)

Valve Guide-Inlet & Exhaust-803/948/1098cc (With groove for 10M186A oil seal)

Stud - Housing - Oil filter (Screw-On)

Stud - Housing - Oil filter (Screw-On)

Plug-Oil Filler & Drain-Differential (6K499)

Plug-Oil Filler & Drain-Differential. Uses 3/8" Allen key. 2 required per diff.

Differential Pinion Oil Seal ATA7047 88G320 (1954-71)

Differential Pinion Oil Seal. For all models from 1954-71.

Rear Hub Oil Seal ( A-Type Axle December 1953 Onwards ) DOUBLE LIP TYPE BTA108 GHS147

Superior Double-Lip type for better sealing on old / worn axles. NOT recommended for use on re-sleeved axles - USE DIF149A

Shock Absorber / Damper / Jack Oil 500ml *UK Mainland Shipping Only*

Shock Absorber / Damper / Jack Oil 500ml. PLEASE NOTE: Due to courier restrictions we are unable to ship this item outside of the UK mainland. Orders from outside the mainland United Kingdom will be cancelled. Within the UK mainland this item can only be sent via courier and shipping will be charged accordingly.

Castrol Classic Oil XL20w/50 1 Litre *UK Mainland Shipping Only*

Castrol Classic Oil XL20w/50 1 litreSuitable for all Minor engines and OHV gearboxes. PLEASE NOTE: Due to courier restrictions we are unable to ship this item outside of the UK mainland. Orders from outside the mainland United Kingdom will be cancelled.

Castrol EP80/90 Gear Oil 1Lt. **REAR AXLE ONLY** *UK Mainland Shipping Only*

Castrol EP80/90 Gear Oil 1Lt. GL-4 specification.**IMPORTANT: For Use In The Differential Only, DO NOT USE IN OHV MODEL GEARBOXES** BMC Recommended a Good Quality 20W50 Oil for OHV gearboxes, please use part no. LUB100.PLEASE NOTE: Due to courier restrictions we are unable to ship this item outside of the UK mainland. Orders from outside the mainland United Kingdom will be cancelled. Within the UK mainland this item can only be sent via courier and shipping will be charged accordingly.

Pinion & Bush - Speedometer Drive 1098cc (2A3420 & 22A71) SECOND-HAND

Pinion & Bush - Speedometer Drive 1098cc (2A3420 & 22A71) SECOND-HAND *Not suitable for 918cc MM, 803cc or early 948cc* You may also need replacement oil seal 9G214

H T Lead Cap (Acorn Nut) (Screw-In To Coil)

H.T.Lead Cap (Screw-In To Coil)

Ignition Coil-(Late Type Push-In H T Lead) (Lucas)

Ignition Coil-(Late Type Push-In H.T. Lead) (Lucas)

Ignition Coil- Sports (Late Type Push-In H T Lead) (Lucas)

Ignition Coil- Sports Coil (Late Type Push-In H.T. Lead) (Lucas)High performance ignition coil, Gives a stronger spark

Coil Sticker "LUCAS"

Coil Sticker "LUCAS"

Ignition Coil (Early Type-Screw In H T Lead) (LUCAS)

Ignition Coil (Early Type-Screw In H.T. Lead) (LUCAS)

Bracket - Dynamo - Coil Mounting (12H51)

Bracket - Dynamo - Coil Mounting (12H51)

Gearbox Rear Tailshaft Oil Seal

Gearbox Rear Tailshaft Oil Seal

Oil Seal for Speedo Drive (8G212 9G214) 2A3254

Oil Seal for Speedo Drive

Carburettor Dashpot Oil 125ml - UK Mainland Shipping Only

Carburettor Dashpot Oil 125ml UK Mainland Shipping Only

Oil Filter Sealing Ring (Tecalemit)

Oil Filter Sealing Ring (Tecalemit)

Oil Filter Washer (Felt) TECALEMIT (7H1758)

Oil Filter Washer (Felt) TECALEMIT(7H1758)

Oil Filter Washer - Metal - Plain TECALEMIT (7H1765)

Oil Filter Washer - Metal - Plain TECALEMIT (7H1765)

Oil Filter Plate Rubber Seal PUROLATOR (7H28)

Oil Filter Plate Rubber Seal PUROLATOR (7H28)

Oil Pipe Union Banjo Screw (2A715) 9M302

Oil Pipe Union Banjo Screw (2A715). Copper washer part no. 10M223C available separately.

Oil Filter Sump (17H8892) SECOND-HAND

Oil Filter Sump (17H8892) SECOND-HAND

Engine Service Kit - 948/1098cc (Push-In H T Lead Type Cap) with Spin-On Oil Filter - LUCAS Components

With a spin-on oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, points, rotor arm & condenser. Please note - this kit does not include H.T. leads

Engine Service Kit - 948/1098cc (Screw-In H T Lead Type Cap) with Spin-On Oil Filter - LUCAS Components

With a spin-on oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, points, rotor arm & condenser. Please note - this kit does not include H.T. leads

Crankshaft Rear Oil Seal - Standard 948/1098cc Engine Only

Spare oil seal for 10M800 Crankshaft Oil Seal Conversion Kit. For 948/1098cc standard Minor engines only. Not for 1098/1275cc Midget/Sprite/Marina engines.

Plastic Oil Filler Cap (Long - Vented) GFE6003

Plastic Oil Filler Cap (Long - Vented) GFE6003Long type to be used when the car has a separate breather canister and breather carburettor (mainly 1098cc engines). If there is a breather tube from rocker cover to air filter, please use 10M212 cap.

Copper Washer-Blanking Plug & Original Fuel Tank

Copper Washer for Blanking Plug Oil Way (Block) & Original Fuel Tank

Crank Rear Oil Seal Conversion 948cc/1098cc

Crank Rear Oil Seal Conversion 948cc/1098cc. This kit is for 948 and 1098cc engines only with the engine code beginning 9M, 10MA or 10ME. It will not fit 948 or 1098cc Midget or Sprite engines with the engine code beginning 9C or 10C. For 1098cc Midget/Sprite engines use part no. 10M800C. Please note: This conversion is intended as an upgrade for the A-series engine for fitment during a full engine rebuild. It will not work as a 'sticking plaster' to prevent oil leaks on a worn engine.

Piston Ring Set-1098cc STD *4-RING TYPE*

Piston Ring Set-1098cc STD *4-RING TYPE*3 x Compression Rings (0.0625") & 1 x Oil Ring (0.125")

Oil Pressure Release Valve Plunger & Spring c/w Copper Washer

Oil Pressure Release Valve Plunger and Spring. Supplied with new copper sealing washer. OHV engines.

Restrictor - Camshaft Oil Feed (1A1964)

Restrictor - Camshaft Oil Feed (1A1964)

Oil Thrower (12A1148)

Oil Thrower (12A1148)

Bolt - Oil Pump (HBN0414)

Bolt - Oil Pump (HBN0414)

Sump Oil Pump Pickup Pipe (12A451) 948 & 1098cc NOS

Sump Oil Pump Pickup Pipe (12A451) 948 & 1098cc NOS. These are new old stock pickup pipes. Due to the age of the part, surface rust should be expected as per the example photo. Not suitable for 803cc engines.

Oil Pump Lock Washer- 803/948/1098cc (12G926)

Oil Pump Lock Washer- 803/948/1098cc (12G926)

Gasket-Oil Pump

Gasket-Oil Pump

Gasket (Oil Filter Case To Block)

Gasket (Oil Filter Case To Block)

Oil Seal-Timing Chain Cover (2A939 / 13H4061)

Oil Seal-Timing Chain Cover

Plug - Oil Gallery Blanking (6.25mm)

Plug - Oil Gallery Blanking (6.25mm)

Plastic Oil Filler Cap (Short - Non Vented) 12A402

Plastic Oil Filler Cap (Short - Non Vented) 12A402Normally used for cars with breather pipe from rocker to air cleaner, for cars with separate canisters and breather carb. please use 10M555.

Oil Pump - Good Quality Pump Requiring No Modifications To Fit

Oil Pump for OHV 803/948/1098cc engines. Good quality pump requiring no modifications. Screws part no: 10M234 x3. Lock washer: 10M233 x1. Gasket: 10M231. Not suitable for 1275cc engines.

Oil Filter Element-Paper Type

Oil Filter Element-Paper Type

Oil Filter Element- Original Felt Type

Oil Filter Element- Original Felt Type for 918, 948, 1098cc

Oil Filter Bowl Plate (For Standard Filter)

Oil Filter Bowl Plate (For Standard Filter)

Oil Pressure Switch (803, 948, 1098)

Oil Pressure Switch for 803, 948 & 1098 engines (Not 1300cc). Taper-fit, does not require washer.

Oil Filter 803cc Engine - Screws onto Block (SS102, GFE107, 8G618)

Oil Filter 803cc Engine (Screws onto Block)

Oil Filter Canister Fixing Bolt (37H689) (WAS FIX128)

Oil Filter Canister Fixing Bolt (37H689)

Piston Ring Set-1098cc +020" *4-RING TYPE*

Piston Ring Set-1098cc +020" *4-RING TYPE*3 x Compression Rings (0.0625") & 1 x Oil Ring (0.125")

Engine Service Kit - 948/1098cc (Push-In H T Lead Type Cap) - LUCAS Components

With a standard paper element oil filter. Kit includes air filter, oil filter, spark plugs, distributor cap, points, rotor arm & condenser. Please note - this kit does not include HT leads.

Piston Ring Set-1098cc +030" *4-RING TYPE*

Piston Ring Set-1098cc +030" *4-RING TYPE*3 x Compression Rings (0.0625") & 1 x Oil Ring (0.125")

Piston Ring Set-1098cc +040" *4-RING TYPE*

Piston Ring Set-1098cc +040" *4-RING TYPE*3 x Compression Rings (0.0625") & 1 x Oil Ring (0.125")

Piston Ring Set-1098cc +060" *4-RING TYPE*

Piston Ring Set-1098cc +060" *4-RING TYPE*3 x Compression Rings (0.0625") & 1 x Oil Ring (0.125")

Spring-Oil Filter Plate (For PUROLATOR Filter) 7H25 (500319)

Spring-Oil Filter Plate (For PUROLATOR Filter)

Engine Service Kit - 948/1098cc (Screw-In H T Lead Type Cap) - LUCAS Components

With a standard paper element oil filter. Please note - this kit does not include HT leads

Metal Oil Filler Cap

Metal Oil Filler Cap

Rocker Cover-Polished Alloy (1098cc No Breather Tube)

Rocker Cover-Polished Alloy (1098cc No Breather Tube) Use Part 8m221C for matching Oil Filler Cap

Seal-Oil Filter Bowl-Purolator

Seal-Oil Filter Bowl-Purolator

Oil Pressure Pipe Straight Adaptor

Oil Pressure Pipe Straight Adaptor - 1/8" BSPT*Not Suitable For 918cc Sidevalve Models.*

Crank Rear Oil Seal Conversion 1098cc 10CC Midget & Sprite Engine Only

Crank Rear Oil Seal Conversion 10CC Midget & Sprite (1098cc version only). For Sprite/Midget engines with 10CC engine code. 1098cc engines using the larger 2" main bearings. Will NOT fit 948cc engines. For 1098cc Minor engines (code 10M) use part no. 10M800. Please note: This conversion is intended as an upgrade for the A-series engine for fitment during a full engine rebuild. It will not work as a 'sticking plaster' to prevent oil leaks on a worn engine.

Gasket - Housing to Block - Oil filter (Screw-On conversion only)

Replacement Gasket - Housing to block - Oil filter (Screw-On conversion only)

Oil Filter-Screw-On For 10M801A

Oil Filter-Screw-On For 10M801A

Screw-On Oil Filter Conversion Kit (Includes Filter)

Screw-On Oil Filter Conversion Kit (Includes Filter) Complete For 948/1098cc Engine. The double ended union from the original unit will need to be transferred to the new.

Oil Pressure Gauge-Smiths 52mm (Mechanical)

Oil Pressure Gauge-Smiths 52mm (Mechanical) - Gauge only. Complete kit with bracket, fixings, pipe and adaptors part no. ACC202K. *Not Suitable For 918cc Sidevalve Models.*

Dynamo Oiler Felt (47H5394)

Dynamo Oiler Felt (47H5394)

Washer - Temperature Sender Blanking Plug & Oil Pipe Banjo Screw (Copper) 1098cc (1B3664) 5/8" I.D.

Washer - Temperature Sender Blanking Plug & Oil Pipe Banjo Screw (Copper) 1098cc (1B3664) 5/8" I.D.

Windscreen Washer Jet-Chrome (Twin)

Windscreen Washer Jet-Chrome (Twin) - Inlet (T-piece to jet) is suitable for 4mm washer pipe part no. WPR160A. PLEASE NOTE : The 4mm washer pipe can be a tight fit, therefore it may need to be warmed up in some boiling water before being pressed onto the jet.