"O" Ring - 25D4 Distributor (27H6547)

Rubber "O" Ring - For 25D4 Distributors

New SALOON Petrol Tank - Replacement Kit With Fittings **SEE DESCRIPTION**

For A30, A35 Saloon vehicles built Oct 1953 onwards. Not suitable for early AS3 models*Please Note - This is an MG Midget tank that has been modified to fit the A30 & A35 Saloons. You will need to retain the filler neck from the original tank, a rubber joiner and clips are included to attach it to the new tank. This tank is not the same shape as the original as such it will require some adjustments to make it fit.

Rubber Dust Seal

For track all rod ends and all steering drag links. x6 required per vehicle

A35 Gearstick Rubber Gaiter

New A35 gearstick rubber gaiter

Accelerator Linkage Rubber Bellows

Rubber gaiter through bulkhead for throttle

A30 Rear Gearbox Mounting (803cc Gearboxes)

Rubber mounting, 'D' mount

Fuel Tank Joiner Rubber Pipe

joins new repro tank to existing curved filler pipe from old tank

Clip - Fuel Tank Joiner Rubber Pipe

Rubber Buffer, Front Shock Absorber

Rebound rubber buffer, fits under front shocker arm, x1 required per side

Rubber Bump Stop, Front Coil Spring

Rubber cone for front suspension coil spring buffer

Wishbone Rubber Bush (Inner Fulcrum)

Metal/Rubber, bush for the wishbone inner fulcrum pin, (x2 per pin) x 4 required per wishbone pan

Top Trunnion Bush

The metal/rubber top-hat bush, for the front shock absorber arm to the top of the front suspension. x 2 required per side

Rear Reflector Rubber Base

Up to 1959 approx RER5 type, as original shape. Use with LMP150A

Sidelight Rubber Base (A30 & Van)

Fits on top of wing under chrome torpedo style sidelights.

Clutch or Brake Pedal Rubber

Clutch or Brake Pedal Rubber, remanufactured by Bull Motif to original sample

Rubber Boot (Rear Backplate)

Rubber Boot Backplate Boot, Rear 

Frame Cylinder Repair Kit

Rubber Repair Kit For Rear Brake Frame Cylinder.

Master Cylinder Cover Plate Gasket Rubber Footwell Seal

Master cylinder footwell, filler cover Plate Gasket Rubber Seal

Van Rear Door Window Rubber (Shaped alternative)

This is a shaped alternative to the original rubber. This countryman style rubber requires an insert to spread the rubber and ensure a closer to fit the bodywork, which is unfortunatley no longer available.

Wiper Spindle Rubber Grommet (4G6468)

Wiper Spindle Rubber Grommet through the front scuttle, 2 required per car

Door Draught Excluder - Black Rubber - Push Fit, 4 Door FRONT

4 Door front doors x1 req per door Rubber type, push fit door seal, fits to the body aperture. No clips required

Door Draught Excluder - Black Rubber - Push Fit, 4 Door REAR

Easy fit no clips required Fits to the body aperture, the door shuts onto it 1 per side

Door Draught Excluder - Black Rubber - Push Fit, 2 Door

Rubber type, push fit door seal, fits to the body aperture. x1 required per door No clips required

Front Windscreen Rubber

High Quality UK made as original, all models.

A30 Rear Window Rubber

High Quality, Uk Made.

A35 Rear Window Rubber

High Quality, Uk Made

New Laminated Front Windscreen

New Laminated Front Windscreen Manufactured to correct specifications.

Front Windscreen Heated

Front Windscreen Heated 12V, 10AMP, 120WATT

Rubber Sealing Strip - Under Front Wing

R/H Metal Strip For Fixing Rubber Strip

For Fixing ZZ402

Rubber Seal Strip - Under Rear Wing

Rubber Seal Strip - Van Rear Wing

Rear Fixed Side Window Rubber 2DR

Rear side window rubber for the fixed windows on the 2door model 1x required per side

Rear Door Square Window Rubber (4 Door)

The rear door, square, window rubber for 4 door models 1x required per side

Rear Opening Side Window Rubber (2DR Deluxe)

Rubber for the Deluxe 2 Door Models, fitted with opening rear side windows x1 required per side

Front Quarterlight Rubber Seals (PAIR)

Pair of front opening quarterlight vent window rubbers, Remanufactured by Bull Motif from original samples, made to the original one-piece design and now with an improved softer compound to aid with the notorious job of fitment, these rubbers will need trimming to fit and fitment is not a quick and easy job. These rubbers are not made to fit the early A30 models with AS3 chassis numbers but we have been informed that it is possible to modify them to suit.

Felt Window Channel, 2 Door

Felt/Flocked rubber insert, pushes into the door glass runner channels on the front door of 2 door saloon and van and pick up models 1x required per door

Felt Window Channel, 4 Door

Felt/Flocked rubber insert, pushes into the door glass runner channels on the front or rear of any 4 door model 1x required per door

Front Door Window Rubbers, 2 Door

2 piece kit, Fits around front door windows. The longer of the two strips sandwiches between the glass carrier channels and the door frame, across the top and down the back edge of the door glass. The shorter strip, is a continuation of the outer profile that acts as a weather strip, it fits across the lower edge on the outside with the lip against the door glass. x1 required per front door

Front Door Window Rubbers, 4 Door

2 piece kit, Fits around front door windows. The longer of the two strips sandwiches between the glass carrier channels and the door frame, across the top and down the back edge of the door glass. The shorter strip, is a continuation of the outer profile that acts as a weather strip, it fits across the lower edge on the outside with the lip against the door glass. x1 required per front door

Boot Seal Rubber

Glue on boot seal for all models

Bonnet Stay Rubber Holder

Bonnet Rim Support Rubber

Bonnet Rim Support Rubber x 4 required per vehicle

Front Seat Base Foam Cushion New Improved! (Not MM or Series II) *** WITH HESSIAN BAFFLE *** See Notes

Front Seat Base Foam Cushion New Improved! (Not MM or Series II) Composite foam giving a firmer cushion and longer lasting than TRM443C. *** Supplied with a hessian baffle for use with TRM802 rubber seat straps *** Not required when using TRM803 rubber diaphragm ***

Hessian Baffle For Front Seat Base Cushion *Use with TRM802 Rubber Straps*

Hessian Baffle For Front Seat Base Cushion *** USE WITH TRM802 RUBBER SEAT STRAPS *** Not required when using TRM803 rubber diaphragm ***

Timing Chain Sprocket-Single Row-Fits Camshaft *SEE NOTES*

Timing Chain Sprocket-Single Row-Fits Camshaft. NON-ORIGINAL A+ plain type WITHOUT rubber tensioning rings.

Pad - Rubber (Fits Either Side Of Road Spring)

Rubber Pad (Fits Either Side Of Road Spring)

Rear Hub "O" Ring-Rubber ATA7225

Rear Hub "O" Ring-Rubber

Red Rubber Grease 500g *UK Mainland Shipping Only*

Red Rubber Grease 500g. PLEASE NOTE: Due to courier restrictions we are unable to ship this item outside of the UK mainland. Orders from outside the mainland United Kingdom will be cancelled.

Vacuum Pipe Rubber Connector-Straight

Vacuum Pipe Rubber Connector-Straight

Vacuum Pipe Rubber Connector-Angled

Vacuum Pipe Rubber Connector-Angled

Vacuum Pipe (Plastic) With Rubber Connectors

Vacuum Pipe (Plastic) With Rubber Connectors

Rubber "O" Ring ( Fits On Bottom Of Gearlever)

Rubber "O" Ring ( Fits On Bottom Of Gearlever)

Rubber Gaiter For Clutch Lever (22H1337)

Rubber Gaiter For Clutch Lever

Rubber Blanking Grommet / Dust Seal - Gearbox Bell Housing (Fits On Side)

Rubber Blanking Grommet / Dust Seal - Gearbox Bell Housing (Fits On Side)

Rubber Blanking Seal / Dust Cover (Fits On Top of Gearbox Bell Housing)

Rubber Blank Seal (Fits On Top)

Oil Filter Plate Rubber Seal PUROLATOR (7H28)

Oil Filter Plate Rubber Seal PUROLATOR (7H28)

Timing Chain Replacement Kit - Single Row - With Seal,Gasket,Chain,Tensioners & Lock Washers - Fits All OHV Models

Timing Chain Replacement Kit - Single Row - With Seal,Gasket,Chain,Tensioners & Lock Washers (No Gears) *Includes early felt type seal & later rubber lip seal* Fits 803/948/1098cc OHV engines. Not for 918cc Sidevalve.

Rubber Washer - Dip Stick 1098cc

Rubber Washer - Dip Stick 1098cc

Timing Chain Rubber Ring Tensioner (Pair)

Timing Chain Rubber Ring Tensioner (Pair)

Engine Mounting Rubber-803/948/1098cc (2 Required) Correct Soft Compound ***NOT MM Side Valve***

Engine Mounting Rubber-803/948/1098cc (2 Required) ***NOT MM Side Valve*** Made with the correct soft compound rubber.Use FIX140x1 nuts plus FIX139 x2 nuts FIX157x2 washers and FIX158x1 washers.

Rubber Seal For Rocker Cover (2K8568)

Rubber Seal For Rocker Cover

Rubber Body-Flasher/Indicator & Stop/Tail Light (For Domed Lens)

Rubber Body-Flasher/Indicator & Stop/Tail Light (For Domed Lens)

Rear Red Reflector - 2" Round (Traveller Rear Post and Austin A30/A35)

Rear Red Reflector-2" Round (Traveller Rear Post and Austin A30/A35) - Austin A30/A35 Use with ZLMP043 rubber base

Rubber Cap For Solenoid Cables

Rubber Cap For Solenoid Cables

Headlamp / Headlight Inner Sealing Rubber

Headlamp / Headlight Inner Sealing Rubber

Headlamp / Headlight Rubber Gasket - Bowl To Wing (For LMP151)

Headlamp / Headlight Rubber Gasket - Bowl To Wing (For LMP151)

Headlamp / Headlight Rubber Gasket - Bowl To Wing (For LMP200)

Headlamp / Headlight Rubber Gasket - Bowl To Wing (For LMP200)

Wiper Motor Mounting Rubbers/Studs-1956-On (Set Of 3)

Wiper Motor Mounting Rubbers/Studs-1956-On (Set Of 3)

Rubber Fixing Peg-Wiper Blade To Arm (Split-Screen Minor/Austin A30) 2H7954

Rubber Fixing Peg-Wiper Blade To Arm (Split-Screen Minor/Austin A30)Suitable for all Morris Minors up to October 1956 and all Austin A30 models built 1952-56

Seat Base Rubber Diaphragm (Use Instead Of Straps)

Seat Base Rubber Diaphragm (Use Instead Of Straps). Fitting instructions supplied. It may be necessary to drill two holes in the front tube and two in the rear tube. For Morris Minor 57 onwards type seats. Dimensions approx 38 x 39cm

Grommet-Door Handle Stop (Rubber Buffer)

Grommet-Door Handle Stop (Rubber Buffer)